WIRELESS PERIMETER SECURITY INTRODUCTION

Solarbeam Security introduces a totally wireless, solar powered outdoor photoelectric perimeter security system designed to provide wireless perimeter protection. Hard-wire installations have become very labor intensive and are a target for lightning. The wireless solar powered photoelectric beam system system is available in all ranges from 330ft. "high Level Detection" single quad, to 660ft "Long Range" high/low detection distances. The units transmit dual or quad synchronized beam that work together to yield a system with exceptional tolerance to poor weather conditions, as well as having a well defined point-to-point detection pattern, elimination nuisance alarms. When a person or vehicle, for example, interrupts a beam at one of your remote sites, a telemetry radio signal is transmitted (up to 5 mile) to your command center, and gives instant notification of an alarm violation. The command unit can notify you by voice, beeper, hand-held radio or your existing alarm system. You can have the beams automatically arm and disarm at pre-programmed times. You may also install remote closed circuit television camers. The cameras will automatically record and send the video image to your computer.

HOW THE MASTER STATION OPERATES: The PC computer utilizing the Solarbeam™ software program provides a complete monitoring and diagnostic information center monitoring up to 254 zones. Using a photograph or map of the complex, protected areas or zones are displayed. The software program allows for CCTV monitoring per zone (PIP) interface, access control inputs, e-mailing of logged events and can send control commands to the towers output relays to activate lights, warranting speakers or even control gate operators.                                                                Shown above, Red, yellow and green zones represent the protected area's and are located around the defined perimeter and displayed on the monitor. The red zone indicates an alarm condition, by touching the zone and clicking, a yellow zone will display, representing that a zone is bypassed. When the zone is green, the system is fully functional. An icon, located at the bottom of the display monitor, allows the user to reset, check history and silence the voice audible alarm signals.

ABOUT THE RADIO COMMUNICATION SYSTEM   Noted below, the Solarbeam System offers four options or types of Master Control receivers depending on the application and what the “end” user wishes to do with the alarm signal, once the perimeter is activated: CHOOSE FROM ONE OF FOUR OPTIONS FOR MASTER STATIONS OPTION 1                   PLC controller provides a 6 zone expandable to 256 zone relay output trigger:        OPTION 2                                      1-8 zone 10.4" HMI voice and bypass touch screen monitor:         OPTION 3  1-16 zone 15" HMI voice and bypass touch screen monitor:    OPTION 4                           254 zone PC computer with Solarbeam software program, CCTV (PIP) internet/upgradable: